Rockwell Automation 9220-WINTA ControlNet Traffic Analyzer Reference Manual - Manual (Page 15)

Publication 9220-052C-EN-P - August 2002
Introduction 1-5
•
1784-PCC Series A Allen-Bradley ControlNet Interface Card
(PCMCIA) with:
•
installation disk version 1.6 or later (shipped with the
1784-PCC card). If your installation disk is earlier than 1.6, we
recommend that you download the latest version from the
website www.ab.com./support/products/pccards.html.
•
Microsoft Windows 95, Windows 98, Windows Me, Windows
2000, or Windows XP
•
CN-1000 Pyramid Solutions ControlNet Interface Card (ISA)
with:
•
1.4.1F firmware or later
•
1.2 driver or later
•
Microsoft Windows 95, Windows 98, Windows Me, Windows
NT 4.0, Windows 2000, or Windows XP
These interface cards contain a ControlNet ASIC that captures all
data on the network. No ControlNet MAC ID is required for the
Traffic Analyzer, since the ASIC is in “listen-only” mode. The
data will be analyzed by the Traffic Analyzer tool after it has
been processed by the ASIC.
Install the Traffic Analyzer Before you install the 1784-PCC driver and the Traffic Analyzer, you
should uninstall the previous version of the Traffic Analyzer.
Uninstall the Previous Version of the Traffic Analyzer
To uninstall the previous version of the Traffic Analyzer:
1. Click Start>Settings>Control Panel.
2. Double click the Add/Remove icon.
3. Double click ControlNet Traffic Analyzer.
4. Click Yes to uninstall the Traffic Analyzer.
TIP
If you are prompted to remove unused shared files, select No to
All.