Rockwell Automation 9220-WINTA ControlNet Traffic Analyzer Reference Manual - Manual (Page 24)

Publication 9220-052C-EN-P - August 2002
2-4 The ControlNet Traffic Analyzer Tool
The following illustration shows the function of each element of the
Traffic Analyzer Control Panel when the Traffic Analyzer is in data
recording mode.
The Filter/Trigger View (the Middle Part)
The Filter/Trigger view is used to configure the triggers or the filters
you need for your analysis. Depending on the selection you made in
the Control Panel (upper part of the document), you see one of the
following four parameters:
•
Start Trigger
•
Stop Trigger
•
Pre-filter
•
Post-filter
The middle part of the user interface is shown in the following
illustration. The Pre-Filter option has been selected.
See Chapter 4 for a more detailed explanation of the Filter/Trigger
view.
Displays the data
traffic after pre-filtering.
Click on Start Trigger
to process the data.
Click on the Start icon to
start analyzing the frames.
Click on the Stop icon to
stop analyzing the frames.
Displays the data traffic
after CNA10 ASIC
filtering of ControlNet.
The time the data
capture has been
running or started.