Rockwell Automation 9220-WINTA ControlNet Traffic Analyzer Reference Manual - Manual (Page 60)

Publication 9220-052C-EN-P - August 2002
5-10 Display Information
After you drop a frame in either the T1 or T2 box, you see a marker
next to the corresponding frame in MAC Frame Data view. The
markers are shown below.
Next to the frame you dropped in the T1 box you see this marker
Next to the frame you dropped in the T2 box you see this marker
These markers serve as an easy way to retrieve a frame that is used as
a time comparison value.
To hide this window, click on the pin button so it is in the “not pin”
state. Then click in another window or just click on the X button.
Copy Data to the Clipboard
You can copy some frame data in text format and use it as
documentation. Select some lines from MAC Frame Data view and
choose Copy Data to Clipboard from the MAC Frame Data view
pop-up menu or use the CTRL+C shortcut. To retrieve the data, open
a word processing application and use the paste function.
You can select more than one line at a time. To select lines in a
sequence:
1. Click on a line.
2. Hold the Shift key down.
3. Click on the last line in the range.
To select non-sequential lines hold the Ctrl key down while you click
on the lines you want to select.
The data format will correspond to the one that is displayed in MAC
Frame Data view.
IMPORTANT
T1 and T2 fields will contain absolute values.