Rockwell Automation 9220-WINTA ControlNet Traffic Analyzer Reference Manual - Manual (Page 44)

Publication 9220-052C-EN-P - August 2002
4-10 Triggers and Filters
When you add or edit a pre-filter, you see the following dialog box:
TIP
For a definition of Status, see page 4-4.
For a definition of Type, see page 1-2.
Define the Producer MAC ID(s) you want to filter. You can define:
•
a single Producer MAC ID (in a range 0-255).
•
a group of IDs. Separate the range by a hyphen (2-88).
The range can extended from 0 to 255.
•
multiple IDs. Separate the IDs by a semi-colon (2;9;27).
•
a group and multiple IDs (2-7;3;8).
If you do not enter a value in this field, the full range (0-255) becomes the default value.
Define the Producer MAC ID(s) you want to filter in each LPacket.
•
For a Generic LPacket, it is the Producer/Consumer ID.
•
For a Fixed LPacket, it is the Destination ID.
•
For a Broadcast ID, it is 255.
You can define:
•
a single Producer/Consumer MAC ID (in a range 0-255).
•
a group of IDs. Separate the range by a hypen (2-88).
The range can extended from 0 to 255.
•
multiple IDs. Separate the IDs by a semi-colon (2;9;27).
•
a group and multiple IDs (2-7;3;8).