Rockwell Automation 9220-WINTA ControlNet Traffic Analyzer Reference Manual - Manual (Page 28)

Publication 9220-052C-EN-P - August 2002
3-2 Accessories and Menus
The Status Bar
The Status Bar contains three panes. Each pane’s function is described
in the following illustration.
Menus and Shortcuts Menus are used as entry points to do a specific action within your
application. You will sometimes find shortcuts associated to menu
entries. A shortcut is a simple way to do an action using a key or a
combination of keys. See Appendix A for a list of function and
shortcut keys.
You may use the Traffic Analyzer tool without the mouse interface -
expect a mouse is required to use the Compute Time Difference dialog
box which makes use of the drag and drop function.
Main Menu
The main menu is the entry point to the main actions you can perform
in the Traffic Analyzer tool. You will find the standard main menu
functions (i.e., New, Open, Save) as well as functions specific to the
Traffic Analyzer tool.
The following sections contain a summary of all menu options and the
corresponding shortcuts.
File Menu
The File menu contains the following options, if a project is not open:
This pane is used to pass messages. These
messages appear when you select an action
from a menu or from the toolbar. It gives a
brief description of the function. This pane represents an
LED and tells the
ControlNet driver status. This pane is used to show status messages
from the ControlNet driver. These messages
appear when the driver state has changed
and could indicate a driver error.
The most recently opened
project(s) show in this area.
Up to four can be listed.