Rockwell Automation 9220-WINTA ControlNet Traffic Analyzer Reference Manual - Manual (Page 67)

Publication 9220-052C-EN-P - August 2002
Other Commands and Options 7-3
When you choose the Create Report option, you see this dialog box:
The report options are:
•
Control Panel Settings Only - only the Control Panel settings will
be included in the report
•
All Displayed Data - the Control Panel settings plus all displayed
data will be included in the report
•
Range of Displayed Data - the dialog box expands to display
two additional fields as shown below
Use these two additional fields to define limits for the range of
data that will be included in the report. The report will include
Control Panel settings plus the range of data you enter in the
two fields. Enter the first frame in the range in the Min frame
number box and the last frame in the range in the Max frame
number box and click OK. By default, the values displayed in the
two fields correspond to the minimum and maximum frame
numbers contained in the current document. You can only
reduce the amount of data that will be included in the report.
Go Offline/Online Hardware
Settings Use this option to toggle between going off line and on line and to set
up hardware settings to go on line. You can choose to use either the
CN-1000 or the 1784-PCC hardware setting when going on line.