Rockwell Automation 9220-WINTA ControlNet Traffic Analyzer Reference Manual - Manual (Page 70)

Publication 9220-052C-EN-P - August 2002
7-6 Other Commands and Options
Click OK. Then you see this message:
If you select YES, the Traffic Analyzer tool goes off line and resets the
default hardware setting. Then the next time you launch the Traffic
Analyzer, it will launch off line.
If you select NO, the Traffic Analyzer tool goes off line and keeps the
default hardware setting. Then the next time you launch the Traffic
Analyzer, it will try to go on line by using the default setting.
Reset the ControlNet Card
and Time This option performs a hardware reset (an ASIC reset). Access the
Reset Card and Time command from the Actions menu.
This function also resets the ASIC timer. Consequently, the absolute
time will start from zero at the time of reset.
Application Options The Options dialog box includes four tabs. Use these tabs to access the
different application options. These options are:
•
Save
•
Buffer
•
Report
•
Display View Options