Rockwell Automation 9220-WINTA ControlNet Traffic Analyzer Reference Manual - Manual (Page 16)

Publication 9220-052C-EN-P - August 2002
1-6 Introduction
Install the Traffic Analyzer
1. Insert the CD-ROM into the computer’s CD-ROM drive. If Auto
Insert Notification (Autorun) is enabled on your CD-ROM drive,
the Setup Utility will start automatically. Go to step 5. Otherwise,
continue with step 2.
2. Select Start>Run.
3. At the Run pop-up window, type x:\setup, where x is the
CD-ROM drive.
4. Click OK.
5. You see this screen:
6. Click on Install Products.
IMPORTANT
We recommend that you exit all Windows programs before
running this Setup program.
TIP
The CD-ROM supports Windows Autorun. If you have Autorun
configured, once the CD is inserted into the CD-ROM drive, the
installation will automatically start at the first setup screen.