Rockwell Automation 9220-WINTA ControlNet Traffic Analyzer Reference Manual - Manual (Page 68)

Publication 9220-052C-EN-P - August 2002
7-4 Other Commands and Options
Access the Offline/Online Hardware Settings command from the
Actions menu.
A description of the offline and online modes follow.
•
offline - you cannot execute the commands assessed through
the use of the ControlNet card. This lets other applications that
need the card to use this hardware resource.
•
online - you can execute all commands accessed through the
use of the ControlNet card selected in the Hardware Settings
dialog box.
TIP
You will see the Hardware Settings menu option only when the
Traffic Analyzer is in offline mode.
TIP
When the Traffic Analyzer tool is off line, the Start icon in the
Control Panel will contain a red X ( ). You can click the
Start icon to access the Hardware Settings dialog box.
IMPORTANT
If the ControlNet card is not plugged in when the computer is
started up under Windows NT 4.0, the Traffic Analyzer tool will
automatically go into offline mode. Do not remove the
ControlNet card until the computer is powered down.
IMPORTANT
If you remove the ControlNet card while working on line under
Windows 95, the Traffic Analyzer tool will automatically go into
offline mode.