Rockwell Automation 2080-LC50 Micro800 Programmable Controllers: Getting Started with PanelView Plus - Manual (Page 17)

Rockwell Automation Publication 2080-QS003A-EN-E - September 2014 17
Create a PanelView Plus Project Chapter 2
5. For the Shortcut Type field,
click the drop-down arrow and
select Symbolic.
6. Under the Design (Local) tab,
select your Micro800 controller.
Next, click Copy from Design to
Runtime.
Note that the Micro800
controller must be powered up
and available on the chosen
network.
7. A confirmation dialog box
appears. Click Yes to continue.