Rockwell Automation 2080-LC50 Micro800 Programmable Controllers: Getting Started with PanelView Plus - Manual (Page 37)

Rockwell Automation Publication 2080-QS003A-EN-E - September 2014 37
Chapter
3
Data Values Upload/Download
Introduction
In this chapter you will learn to use the PanelView Plus application that you created in the previous chapter to interact with
the Micro800 controller global variables in Connected Components Workbench software.
Using Data Values Upload/Download
The Data Values Upload/Download feature allows you upload live logical values of variables that may have been changed
by the operator in PanelView Plus (or program logic) and save them in your project as project values. Then optionally at
download, the project values can be re-downloaded. The Data Values Upload/Download feature applies to both local and
global variables, including instances of function blocks.
In Connected Components Workbench, when not monitoring the live logical values of variables, Connected Components
Workbench will display a column named Project Values. Project Values are logical values which are saved in the project.
ATTENTION: If power is lost during the upload or download process, all user data will be lost.