Rockwell Automation 2080-LC50 Micro800 Programmable Controllers: Getting Started with PanelView Plus - Manual (Page 44)

44 Rockwell Automation Publication 2080-QS003A-EN-E - September 2014
Chapter 3 Data Values Upload/Download
3. Click the Copy CV to PV push
button to copy the values from
the counter variables (CV) to
the project variables (PV).
4. While connected to the
controller but not in Debug
mode, right-click on the
controller project and select
Upload.
5. A dialog box appears to ask if
you want to replace the current
project’s contents. Click Yes to
continue.
Values have been
copied from CV