Rockwell Automation 2080-LC50 Micro800 Programmable Controllers: Getting Started with PanelView Plus - Manual (Page 60)

60 Rockwell Automation Publication 2080-QS003A-EN-E - September 2014
Appendix A Data Types
3. The starting index of the array must be zero.
An example of an array variable in Connected Components Workbench is shown
below. The index of the array is shown in square brackets.
When assigning a tag to an object in your PanelView Plus application, you can
assign a specific index of an array by doing the following:
1. In the Tag Browser window, select the Online -> Array_Data_Type folder.
A list of tags of the array and each of its index is displayed.
2. Select the tag of the array with the desired index, then click OK.