Rockwell Automation 2080-LC50 Micro800 Programmable Controllers: Getting Started with PanelView Plus - Manual (Page 42)

42 Rockwell Automation Publication 2080-QS003A-EN-E - September 2014
Chapter 3 Data Values Upload/Download
9. Click the Micro820-VAR tab.
In Debug mode, the controller
has updated the values of the
global variables from the project
you just downloaded.
Note that the Initial Value has
precedence over Project Value
when downloading.
See Priority of Logical Values
When Downloading on page 38
for more information.
10. The values of the global
variables are also updated on the
PanelView Plus application.
You have finished downloading the project to the controller. In the next section, you will learn how to change the values of
the counter variables (CV) and upload the changes to the controller.
Values have
been updated