Rockwell Automation 2080-LC50 Micro800 Programmable Controllers: Getting Started with PanelView Plus - Manual (Page 7)

7 Rockwell Automation Publication 2080-QS003A-EN-E - September 2014 7
Where to Start
Overview
This quick start instructions illustrate how you can use the Micro800 controller global variables together with the
PanelView Plus HMI terminals. Step-by-step instructions are provided on how to create a sample application and how to
assign global variable tags to elements. You will also be shown how to export these global variables for editing on your PC.
The sample projects that are used in this quick start are available with the latest version of Connected Components
Workbench to help you get started. They can also be downloaded from the Sample Code library.
Hardware and Software Compatibility
The various features described in this quick start are compatible with the following:
• Connected Components Workbench version 7.0 and later
• FactoryTalk View version 8.0 and later
• Micro800 controller firmware revision 7 and later.
TIP Download the Sample Projects
You can download the sample projects used in this Quick Start from the following link:
http://www.rockwellautomation.com/go/scmicro800
Enter the string "Micro800 with PanelView Plus & Data Upload/Download" into the Search box to locate the project.
PanelView Plus HMI Terminals Micro800 Programmable Controllers
FactoryTalk View Studio Software Connected Components Workbench Software