Rockwell Automation 2080-LC50 Micro800 Programmable Controllers: Getting Started with PanelView Plus - Manual (Page 27)

Rockwell Automation Publication 2080-QS003A-EN-E - September 2014 27
Create a PanelView Plus Project Chapter 2
2. The Tag Browser window closes
and the Connections tab has
been updated with the selected
tag.
Click OK to save the
configuration.
3. Repeat the instructions from
step 1 and create numeric display
objects and assign global variable
tags "PV_2" and "PV_3" to
them.
You have finished creating the numeric display objects and assigned the counter variable (CV) and project variable (PV)
tags to each object. See the next section to learn how to create the momentary push button objects.