Assign a cv tag to the display object, Assign a cv tag to the – Rockwell Automation 2080-LC50 Micro800 Programmable Controllers: Getting Started with PanelView Plus User Manual
Page 25
Advertising
Rockwell Automation Publication 2080-QS003A-EN-E - September 2014
25
Create a PanelView Plus Project Chapter 2
Assign a CV Tag to the Display Object
1.
For this example, select the tag
"CV_1", then click OK.
2.
The Tag Browser window closes
and the Connections tab has
been updated with the selected
tag.
Click OK to save the
configuration.
Advertising
This manual is related to the following products: