1 – build and download a project, Build and download a project, Introduction – Rockwell Automation 2080-LC50 Micro800 Programmable Controllers: Getting Started with PanelView Plus User Manual
Page 9: Build a sample project
Advertising
Rockwell Automation Publication 2080-QS003A-EN-E - September 2014
9
Chapter
1
Build and Download a Project
Introduction
In this chapter, you will learn how to build a project in Connected Components Workbench, and download the project to
the Micro800 controller. This project contains the Micro800 controller global variables which will be used in the
subsequent chapters of this quick start.
Build a Sample Project
In this section, you will learn how to build a sample project for Connected Components Workbench.
1.
Launch the Connected
Components Workbench
software. Then click on File ->
Sample Projects.
Advertising
This manual is related to the following products: