Rockwell Automation 2080-LC50 Micro800 Programmable Controllers: Getting Started with PanelView Plus - Manual (Page 8)

8 Rockwell Automation Publication 2080-QS003A-EN-E - September 2014
Where to Start
Follow These Steps
The major subsections for this quick start project are outlined in the following flowchart. Follow the steps under each
subsection to become familiar with the required procedure to create your PanelView Plus application, configure it to
communicate with the global variables of your controller, and interact with the variables.
Data Values Upload/Download
See page 37
Using Data Values Upload/Download on page 37
Download the Project on page 40
Variable Export/Import
See page 51
Using Variable Export/Import on page 51
Export Global Variables on page 53
Change CV values and Upload the Project on page 43
Edit Global Variables on page 55
Download the Project With Project Values on page 46
Import Global Variables on page 56
Create a PanelView Plus Project
See page 15
Create a PanelView Plus Project on page 15
Create a PanelView Plus Application on page 20
Build and Download a Project
See page 9
Build a Sample Project on page 9
Download the Project to the Controller on page 13