Rockwell Automation 2080-LC50 Micro800 Programmable Controllers: Getting Started with PanelView Plus - Manual (Page 35)

Rockwell Automation Publication 2080-QS003A-EN-E - September 2014 35
Create a PanelView Plus Project Chapter 2
Assign a Copy CV_PV Tag to the Push Button
3. For this example, select the tag
"Copy_CV_PV", then click OK.
4. The Tag Browser window closes
and the Connections tab has
been updated with the selected
tag.
Click OK to save the
configuration.
You have finished creating the momentary push button objects and assigned the Key Press, Reset, and copy CV to PV tags
to each object. In the next chapter, you will learn about the Micro800 controller global variables and how to use them.