Rockwell Automation 2080-LC50 Micro800 Programmable Controllers: Getting Started with PanelView Plus - Manual (Page 43)

Rockwell Automation Publication 2080-QS003A-EN-E - September 2014 43
Data Values Upload/Download Chapter 3
Change CV values and Upload the Project
In this section, you will change the value of the counter variables (CV), copy the values to the project variables (PV), and
upload the changes to the controller.
1. Use the Key Press push button
to increment the values of the
counter variables (CV).
2. Observe the new values of the
counter variables (CV) in the
controller.
Values have been
incremented