Rockwell Automation 2080-LC50 Micro800 Programmable Controllers: Getting Started with PanelView Plus - Manual (Page 28)

28 Rockwell Automation Publication 2080-QS003A-EN-E - September 2014
Chapter 2 Create a PanelView Plus Project
Momentary Push Button Objects
In this section, you will learn how to create and configure momentary push button objects. This push button is used to
increment the value of its associated counter variable (CV), to reset the CV, and to copy the values in the CV to the project
variables (PV).
1. Create momentary push button
objects (Key Press, Copy
CV to PV, and Reset Counter)
on your application screen as
shown in the example above. To
configure each object, right-click
the object and select Properties.
A Momentary Push Button
Properties window appears.
Under the General tab, you can
modify the look of the object. If
you make any changes, click
Apply after you have finished.
Key Press
buttons
Reset Counter
button
Copy CV to
PV button