Rockwell Automation 2080-LC50 Micro800 Programmable Controllers: Getting Started with PanelView Plus - Manual (Page 52)

52 Rockwell Automation Publication 2080-QS003A-EN-E - September 2014
Chapter 4 Variable Export/Import
To begin, open the sample Micro820 controller project in Connected Components Workbench.
In this chapter you will learn how to do the following:
1. Export Global Variables on page 53
2. Edit Global Variables on page 55
3. Import Global Variables on page 56
For this example, only the steps to export/import global variables are shown. You can also use the following steps to
export/import local variables by right-clicking on the POU/Program instead of the controller.