Rockwell Automation 2080-LC50 Micro800 Programmable Controllers: Getting Started with PanelView Plus - Manual (Page 30)

30 Rockwell Automation Publication 2080-QS003A-EN-E - September 2014
Chapter 2 Create a PanelView Plus Project
4. In the Tag Browser window,
click Refresh All Folders.
5. Select the Online folder to
display the list of available tags
that you can assign to the object.
The Tag Browser window will
communicate to the Micro800
controller and show all available
Micro800 global variables that
can be referenced in PanelView
Plus. Offline selection of
variables is not supported.