Rockwell Automation 2080-LC50 Micro800 Programmable Controllers: Getting Started with PanelView Plus - Manual (Page 20)

20 Rockwell Automation Publication 2080-QS003A-EN-E - September 2014
Chapter 2 Create a PanelView Plus Project
Create a PanelView Plus Application
In this section, you will learn how to create a simple application using various object and assigning tags to them that
correspond to different Micro800 controller global variables. The variables support a wide range of data types and a variable
can also be created as an array of a data type. For more information on the list of supported data types and how to use an
array of data types, see
Appendix A .
In the Explorer window of the project that you have created earlier, right-click on MAIN and select Open. A blank
application screen template appears.
The following images shows some of the Micro800 controller global variables that will be used in this example and the
application that will be created.
Example of Micro800 Global Variables in Connected Components Workbench