Rockwell Automation 2092-DAx Ultra1500 User Manual - Manual (Page 41)

Publication 2092-UM001D-EN-P — July 2005
Ultra1500 Connector Data 2-11
Analog Outputs
The Ultra1500 contains two analog outputs that can be configured through
Ultraware software to represent internal drive variables. Figure 2.7 shows the
configuration of the analog outputs. The following table provides a description
of the analog outputs.
Figure 2.7
Analog Output Configuration
The following table provides a description of the analog output specifications.
IMPORTANT
Output values can vary during power-up until the specified
power supply voltage is reached.
Parameter Description Minimum Maximum
Resolution
Number of states that the output signal is divided
into, which is 2
(to the number of bits)
.
8 Bits —
Output
Current
Current capability of the output. -10 mA +10 mA
Output
Signal Range
Range of the output voltage. -10V +10V
AOUT 1
10 k Ω
220 Ω
0.033 µF
+
-
+5V
5 k Ω
5 k Ω
Ultra1500 Drive