Rockwell Automation 2092-DAx Ultra1500 User Manual - Manual (Page 84)

Publication 2092-UM001D-EN-P — July 2005
5-4 Ultra1500 Application Examples
ControlLogix and SoftLogix modules, refer to the table below for the
appropriate publication.
To configure your analog motion module and create a program including your
2092-DAx drive:
1. Apply power to your Logix chassis/PC containing the analog motion
module and open your RSLogix5000 software.
2. Select New in the File menu. The New Controller window opens.
• Select controller type
• Name the file
• Select the ControlLogix chassis size
• Select the ControlLogix processor slot
3. Select OK.
4. Select Controller Properties in the edit menu. The Controller Properties
window opens.
5. Select the Date and Time tab. The following window opens.
For:
Refer to this
Document
Publication Number
Detailed information on configuring and
troubleshooting your ControlLogix motion
module ControlLogix Motion
Module Setup and
Configuration Manual
1756-UM006x-EN-P
Detailed information on configuring and
troubleshooting your SoftLogix™ PCI card
SoftLogix Motion Card
Setup and Configuration
Manual
1784-UM003x-EN-P