Rockwell Automation 2706-NP3 DL20 OFFLINE PROGRAMMING MANUAL - Manual (Page 31)

Message Operations
Chapter 5
5–8
Option 6 - Edit/Create Messages on the Main Menu also lets you edit
existing messages.
To edit a DL20 message:
1. Type 6 and press [Enter] to select 6 - Edit/Create Messages from the
Main Menu.
The following screen appears.
Compares DL20 memory size
to actual memory usage.
2. Each time you enter an edit session from the Main Menu, you are asked if
you want to check available DL20 memory.
Type Y and press [Enter] to check the available memory. Otherwise
press [Enter] to move to the next prompt.
If you enter Y, you are also asked to enter a range of message numbers for
the memory check.
For example, if you have 25 messages numbered from 1 to 25 you would
start at 1 and stop at 25.
3. Type the start message number and press [Enter].
4. Type the end message number and press [Enter].
Editing Messages