Rockwell Automation 2706-NP3 DL20 OFFLINE PROGRAMMING MANUAL - Manual (Page 58)

Downloading Message Files
Chapter 8
8–4
Downloading Special Function File Only
1. Press [Enter] at the first prompt if you don’t want to send all files.
You are then asked if you want to send the Special Function file only.
2. Type Y and press [Enter] to send only the Special Function file.
The download begins. During the download, the screen displays the
message ”Sending Special Functions”.
3. When the download is complete, you can enter a range of messages to
send or press [End] to return to the Main Menu.
Downloading Selected Range of Files
1. Press [Enter] at the first prompt if you don’t want to send all files.
You are then asked if you want to send the Special Function file only.
2. Press [Enter] to download a selected range of message files without
the Special Function file.
You are then prompted to enter a range of numbers to download.
3. Enter the message number at which to start the download and press
[Enter]. The number must be in the range 1 - 1022.
4. Enter the last message number to download and press [Enter]. You must
enter a number that is equal to or greater than the start number.
As each message is downloaded, the screen displays the message number,
message contents and the number of lines the message will occupy.
You can press [Esc] at any time to stop the download and return to the
Main Menu. The current message will finish downloading before the
download is aborted.
5. When the download is complete you can enter another range of numbers
or press [End] to return to the Main Menu.
Downloading
Message Files