Rockwell Automation 2706-NP3 DL20 OFFLINE PROGRAMMING MANUAL User Manual
Page 49
Transferring S Record Files
Chapter 7
7–9
5. Set the ”Track Select Switch” to the correct setting on the recorder.
6. Type the name of the S Record file you want to download and press
[Enter]. You can include a drive in the name (A: B: C: or D:).
The program verifies the format of all records in the file. The records
display on the screen as they are checked. OK appears next to
each record that is free of errors. For example:
You are then asked if you want to send the records.
7. Press [Enter] to send the records. If you type N, you return to the
Main Menu.
After pressing [Enter], the following message appears:
The ”Record on Tape” indicator lights when the download begins.
Records are displayed on the screen as they are downloaded.
You can abort the download at any time by pressing [Ctrl][Z].
When the download is done you return to the Main Menu.