Rockwell Automation 2706-NP3 DL20 OFFLINE PROGRAMMING MANUAL - Manual (Page 51)

Transferring S Record Files
Chapter 7
7–11
6. Type the name of an S Record file and press [Enter].
If the file exists, this message appears.
Type Y and press [Enter] to overwrite file; otherwise press [Enter] to
provide a different file name.
The following message appears:
The ”Read from Tape” indicator lights when the upload begins.
Records are verified for the correct format and then displayed on the
screen as they are downloaded.
You can abort the upload at any time by pressing [Ctrl][Z].
When the download is done, the message ALL OKAY appears briefly
and you return to the Main Menu.