Rockwell Automation 2706-NP3 DL20 OFFLINE PROGRAMMING MANUAL - Manual (Page 48)

Transferring S Record Files
Chapter 7
7–8
This section shows how to transfer an S Record file to a 1770-SB Recorder
for storage or for downloading the same messages to multiple DL20 displays.
Before starting the download:
•
The recorder must be connected to your computer and powered on as
described on page 7–3.
•
You must know the name of the S Record file to download.
You can view all S Record files on disk by selecting option
5 - View File Names off the File Read/Write Functions submenu.
To download an S Record file to a data recorder:
1. Select option 8 - S Record Message File Upload (Read)/Download
(Write) from the Main Menu.
The File Read/Write Functions submenu appears.
2. Select option 4 - Write Disk File to 1770-SB Cartridge.
The following screen prompts you for an S Record file name. It also
shows the selected baud rate and communication port.
3. Set baud rate of data recorder to same baud rate shown on screen.
4. Verify that a tape cartridge is installed in data recorder.
Downloading S Record File
to Data Recorder