Rockwell Automation 2706-NP3 DL20 OFFLINE PROGRAMMING MANUAL - Manual (Page 50)

Transferring S Record Files
Chapter 7
7–10
This section shows how to transfer an S Record file from a 1770-SB Data
Recorder to a personal computer.
Before starting the upload, make sure the recorder is connected to your
computer as described on page 7–3.
To upload an S Record file from the data recorder to your computer:
1. Select option 8 - S Record/Message File Upload (Read)/Download
(Write) from the Main Menu.
The File Read/Write Functions submenu appears.
2. Select option 3 - Read 1770-SB Cartridge to Disk File.
The following screen appears. It prompts you to type the name of an S
Record file to receive the data.
3. Set the baud rate of the data recorder to same baud rate shown on screen.
4. Verify that a tape cartridge is installed in the data recorder.
5. Verify that the ”Track Select” switch on the recorder is set to the
correct track.
Uploading File from
Data Recorder