Rockwell Automation 2706-NP3 DL20 OFFLINE PROGRAMMING MANUAL - Manual (Page 44)

Transferring S Record Files
Chapter 7
7–4
This section shows how to download an S Record file from your computer to
a DL20 Display. DL20 message files are converted to an S Record file
using option 7 - S Record /Message File Conversion Functions.
Before starting the download:
•
Your personal computer must be connected to the DL20 Display.
•
You must know the name of the S Record file to download.
You can view all S Record files on disk by selecting option
5 - View File Names on the File Read/Write Functions submenu.
•
Verify that the DL20 has enough memory to store the S Record file. To
check the file size, convert the file back to a message file using menu
option 7. Then select option 6 to ”Check Available DL20 Memory”.
Important: The DL20 must have enough memory to store the S Record
file or the messages in the DL20 may be altered.
To download an S Record file to a DL20:
1. Select option 8 - S Record Message File Upload (Read)/Download
(Write) from the Main Menu.
The File Read/Write Functions submenu appears.
Downloading
S Record File to DL20