Rockwell Automation 2706-NP3 DL20 OFFLINE PROGRAMMING MANUAL - Manual (Page 57)

Downloading Message Files
Chapter 8
8–3
To download message files to the DL20:
1. Select option 9 - Message File Download from the Main Menu.
The following screen appears.
If the CONFIG.DAT file does not
exist another screen will appear
first prompting you for the DL20
type and memory size.
The procedures below show what selections to make for each of the
download options.
If an S Record file exists for the messages being downloaded, the screen
displays the name of the file.
Downloading All Files
1. Type Y and [Enter] at the first prompt to download all files
including message files, configuration files and the special function file.
The download begins. The screen displays a message verifying that the
special functions file will be downloaded. As each message file is
downloaded, the screen displays the message number, message contents
and the number of lines the message will occupy.
Press [Esc] to stop the download and return to the Main Menu. The
current message will finish downloading before the download is aborted.
2. Press [End] when the download is complete to return to the Main Menu.