Rockwell Automation 2706-NP3 DL20 OFFLINE PROGRAMMING MANUAL - Manual (Page 47)

Transferring S Record Files
Chapter 7
7–7
3. Type a 1 to 8 character name of the file to receive the data and
press [Enter]. Do not enter a file extension. You can include a drive
letter in the name, e.g., A:DL20#1.
If the file exists, this message appears.
Type Y and press [Enter] to overwrite file; otherwise press [Enter] to
provide a different file name.
The upload operation reads data from the DL20 memory and writes
records to the specified file. The records display on the screen as they
are received. To abort the operation and return to the Main Menu, press
[Ctrl][Z].
When the transfer is complete, each record is verified. OK appears next
to each record that is free of checksum errors. If the entire file is free of
errors, you will briefly see the message ALL OKAY and return to the
Main Menu.
Note: This operation does not perform a file to file comparison
of data.