Rockwell Automation 2706-NP3 DL20 OFFLINE PROGRAMMING MANUAL User Manual
Page 64
Advertising
Printing Messages
Chapter 10
10–3
5. Specify whether you want to print system attributes. Type Y or N
and press [Enter].
Printing starts. The screen displays the number of each message as it
prints. Only the messages in the current DL20 subdirectory or on disk
will be printed.
Press [Esc] to abort printing. The current message will finish printing
before you return to the Main Menu.
After all messages have printed you are asked if you want to delete them
from disk.
Important: Do not delete messages before saving or converting the
message files to an S Record file.
6. Type Y and [Enter] to delete messages. Otherwise, just press [Enter].
You return to the Main Menu.
Advertising