Rockwell Automation 2706-NP3 DL20 OFFLINE PROGRAMMING MANUAL - Manual (Page 53)

Transferring S Record Files
Chapter 7
7–13
3. Select the type of DL20 files you want to view. You are only allowed to
view one type (S Record files, *.DAT files or *.OLD files). Type Y next
to the type of files you want to list and press [Enter].
4. Select the drive on which you want to search for the files.
To select a drive other than A, backspace [
←
] over A:, type another drive
letter followed by the colon (B: C: or D:) and press [Enter].
The screen then displays a list of files for the selected type. Below are
sample file listings.
5. Press [Esc] to exit and return to the File Read/Write Functions menu.
S Record Files (*. )
Message Files (*.DAT)