Rockwell Automation 2706-NP3 DL20 OFFLINE PROGRAMMING MANUAL - Manual (Page 39)

Message File Conversions
Chapter 6
6–5
Option 3 - View File Names on the File Conversion Functions submenu lets
you display a list of DL20 files in the DL20 subdirectory (or another drive).
You can display the following types of DL20 files:
•
S Record files
•
Message files including DL20 configuration files (.DAT)
•
Old message files (.OLD)
To view DL20 files:
1. Select option 7– S Record/Message File Conversion Functions from the
Main Menu.
2. Select option 3 - View File Names from the File Conversion Functions
submenu.
The following screen appears with S Record Files selected.
3. Select the type of DL20 files you want to view. You are only allowed to
view one type (S Record files, *.DAT files or *.OLD files). Type Y next
to the type of files you want to list and press [Enter].
4. Select the drive on which you want to search for the files.
To select a drive other than A, backspace [
←
] over A:, type another drive
letter followed by the colon (B: C: or D:) and press [Enter].
The screen then displays a list of files for the selected type. The next
page shows sample file listings.
5. Press [Esc] to exit and return to the File Conversion Functions submenu.
Viewing DL20 Files