Rockwell Automation Current Input Module - Manual (Page 2)

E Copyright Reliance Electric Industrial Company 1993.
Multibusr is a registered trademark of Intel Corporation.
Beldent is a trademark of Cooper Industries.
ReSourcet is a trademark of Reliance Electric Company or its subsidiaries.
Reliancer, AutoMaxr and AutoMater are registered trademarks of Reliance Electric
ąąCompany or its subsidiaries.
The information in this user's manual is subject to change without notice.
DANGER
THIS UNIT AND ITS ASSOCIATED EQUIPMENT MUST BE INSTALLED,
ADJUSTED, AND MAINTAINED BY QUALIFIED PERSONNEL WHO ARE
FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF ALL EQUIPMENT
IN THE SYSTEM AND THE POTENTIAL HAZARDS INVOLVED. READ AND
UNDERSTAND THIS MANUAL AND OTHER MANUALS APPLICABLE TO THE
EQUIPMENT IN YOUR INSTALLATION. FAILURE TO OBSERVE THESE
PRECAUTIONS COULD RESULT IN SEVERE BODILY INJURY OR LOSS OF LIFE.
WARNING
INSERTING OR REMOVING THIS MODULE OR ITS CONNECTING CABLES MAY
RESULT IN UNEXPECTED MACHINE MOTION. POWER TO THE MACHINE MUST
BE TURNED OFF BEFORE INSERTING OR REMOVING THE MODULE OR ITS
CONNECTING CABLES. FAILURE TO OBSERVE THESE PRECAUTIONS COULD
RESULT IN BODILY INJURY.
CAUTION
THIS MODULE CONTAINS STATICĆSENSITIVE COMPONENTS. CARELESS
HANDLING CAN CAUSE SEVERE DAMAGE.
DO NOT TOUCH THE CONNECTORS ON THE BACK OF THE MODULE. WHEN
NOT IN USE, THE MODULE SHOULD BE STORED IN AN ANTIĆSTATIC BAG. THE
PLASTIC COVER SHOULD NOT BE REMOVED. FAILURE TO OBSERVE THIS
PRECAUTION COULD RESULT IN DAMAGE TO OR DESTRUCTION OF THE
EQUIPMENT.