Rockwell Automation 6012DB PowerFlex Medium Voltage Variable Frequency Drive - Manual (Page 15)

Rockwell Automation Publication 6000-UM001B-EN-P - October 2014 15
Introduction Chapter 1
Standards Compliance Technical specifications and relevant standards in the manufacture, testing, and
acceptance of equipment include:
Standard Number Standard Description
IEEE 519 Electrical and Electronics Engineers Institute Harmonics Control Requirements
IEC 60146 Semiconductor Converters–Specification of Basic Requirements
IEC 60038:1983 IEC Standard Voltages
IEC 60050-151:2001 International Electrotechnical Vocabulary, Chapter 151: Electrical and Magnetic Devices
IEC 60050-551:1999 International Electrotechnical Vocabulary, Chapter 551: Power Electronics
IEC 60076 Electric Power Transformer
IEC 60721-3-1:1997 Classification of Environmental Conditions, Part 3: Classification of Groups of Environmental
Parameters and their Severities. Section 1: Storage
IEC 60721-3-2:1997 Classification of Environmental Conditions, Part 3: Classification of Groups of Environmental
Parameters and their Severities
IEC 60721-3-3:2008 Classification of Environmental Conditions, Part 3: Classification of Groups of Environmental
Parameters and their Severities. Stationary Use at Weather-protected Locations
IEC 61000-2-4:2002 Electromagnetic Compatibility (EMC), Part 2, Environment, Chapter 4: Compatibility Levels in
Industrial Plants for Low Frequency Conducted Disturbances
IEC 61000-4-7:2002 Electromagnetic Compatibility (EMC) Part 4: Testing and Measurement Techniques, Chapter 7:
General Guide on Harmonics and Inter-harmonics Measurements and Instrumentation, for
Power Supply Systems and Equipment Connected Thereto
IEC 61800-3:2004 Adjustable Speed Electrical Power Drive Systems, Part 3: EMC Requirements and Specific Test
Methods
IEC 61800-4:2004 Adjustable Speed Electrical Power Drive Systems, Part 4: General Requirement—Rating
Specifications for AC Power Drive Systems above 1000V AC and not Exceeding 35 kV
IEC 60757-1983 Code for Designation of Colors
IEC 106:1989 Environment Condition Guides for Specifying Performance Rating of Equipment
IEC 61508.1-7 Functional Safety of Electrical/Electronic/Programmable Electronic Safety-related Systems
GB/T 2900.18-2008 Electrotechnical terminology—Low Voltage Apparatus (IEC60050-441:1984)
GB/T 3859.1-2013 Semiconductor Converters. Specification of Basic Requirements (IEC60146-1-1:1991)
GB/T 3859.2-2013 Semiconductor Converters. Application Guide (IEC60146-1-2:1991)
GB/T 3859.3-2013 Semiconductor Converters. Transformers and Reactors (IEC 60146-1-3,1991)
GB 7678-87 Semiconductor Self-commutated Converters
GB 3797-2005 Electric-driving Control Gear, Part 2: Electric-driving Control Gear Incorporating Electronic
Devices
GB/T 14549-93 Quality of Electric Energy Supply Harmonics in Public Supply Network
GB 4208-2008 Degrees of Protection Provided by Enclosures (IP Code) (IEC 60529:1989)
GB/T 16935.1-2008 Insulation Coordination for Equipment within Low Voltage Systems, Part 1: Principles,
Requirements, and Tests (IEC 60664-1:1992)
GB 156-2007 Standard Voltages
GB/T 1980-2005 Standard Frequencies
GB/T 2423.10 Electric and Electronic Products—Basic Environmental Test Regulations for Electricians—
Guidelines for Vibration (sine)
GB/T 2681 Colors of Insulated Conductors Used in Electrical Assembly Devices
GB 2682 Colors of Indicator Lights and Push Buttons Used in Electrical Assembly Devices
GB/T 4588.1-1996 Specification for Single and Double-sided Printed Boards with Plain Holes
GB/T 4588.2-1996 Sectional Specification: Single and Double-sided Printed Boards with Plated-through Holes