Rockwell Automation 6012DB PowerFlex Medium Voltage Variable Frequency Drive - Manual (Page 34)

34 Rockwell Automation Publication 6000-UM001B-EN-P - October 2014
Chapter 3 Setup and Operation
Drive Setup and Configuration Controls
There are five buttons in the Top Menu Bar. A description of the functionality is
described in
Table 3 .
Status Indicators
There are eight status indicators on Status Bar.
Table 3 - Setup and Configuration Controls
• Return to Main Interface screen
• Check warnings
• Check faults
• Reset alarm status
• Show alarm history
• Check voltage trends
• Check current trends
• Check frequency trends
• Pause trending
• Confirm/change bypass configuration
• Change from local to remote control
• Close/open drive contactors (auto bypass)
• Access System Settings
– Change Language
– Change Bypass Mode
• Access P and T Parameters
Table 4 - Status Indicators
Allowed The drive is in a state that will allow MV to be applied
MVClosd Indicates that the input switching device feeding MV power to the drive is closed
Ready Drive is ready to start
Connect Being connected with medium voltage
Running The drive is running
Warning The system has faults or warnings
Local The system is under Local Control
Remote The system is under Remote Control