Rockwell Automation 6012DB PowerFlex Medium Voltage Variable Frequency Drive - Manual (Page 95)

Rockwell Automation Publication 6000-UM001B-EN-P - October 2014 95
Preventative Maintenance and Component Replacement Chapter 5
Install Drawout Power Modules
1. Place the Power Module module on the lift cart.
Ensure the Power Module is properly oriented; the finger assemblies must
face towards the drive.
2. Position the lift cart in front of the cabinet and raise the Power Module to
the proper height.
3. Align the wheels on the Power Module with the tray assembly guides on
each side of the Power Module tray assembly.
4. Push the Power Module slowly backwards into the cabinet until the cam
mechanism contacts the pin mounted on the tray assembly.
Wheels
Tray Assembly Guides
Cam
Mechanism
Actuator
Power Module
Positioning
Handles