Operation bar, Setup and monitor box, Main interface controls – Rockwell Automation 6012DB PowerFlex Medium Voltage Variable Frequency Drive User Manual
Page 35: Operation bar setup and monitor box
Rockwell Automation Publication 6000-UM001B-EN-P - October 2014
35
Setup and Operation
Chapter 3
Operation Bar
Setup and Monitor Box
The set frequency field is the only one which is user-configurable. See
for instruction on how to set the frequency.
Main Interface Controls
From the Main Interface screen, you can:
Table 5 - Operation Bar Buttons
Start
Starts the drive only if no fault is found during self test at startup; otherwise, this button is invalid
Accel
Increases the frequency by the set step
Decel
Decreases the frequency by the set step
Stop
Stop output of the drive
Reset
(1)
(1) The drive must not be running to complete this operation.
Resets the drive (under fault conditions) once
Table 6 - Monitoring Parameters
Set Frequency
Frequency set for the drive (Hz)
Actual Frequency
Actual frequency of the drive (Hz)
Motor Speed
Speed of the motor (%)
Motor Voltage
Voltage of the motor stator (V)
Motor Current
Current of the motor stator (A)