Rockwell Automation 1786-series ControlNet Coax Media Planning and Installation Guide - Manual (Page 3)

3 Publication CNET-IN002B-EN-P - June 2010 3
Summary of Changes
Introduction This release of this document contains updated information and illustrations.
New information is marked by change bars in the side column, as shown to
the right.
New Information See the table for the section that contains the information.
Section Changes
Chapter 1 Updated illustrations that show how components
configure a cable system.
Chapter 2 Equation for determining a segment with an
attenuation value.
Chapter 2 Repeaters are shown in different topologies, such as
series and parallel.
Chapter 2 Considerations for choosing the correct tap connections.
Chapter 3 Instructions for mounting a tap assembly to a DIN rail or
another surface with a transition plate.
Glossary Definitions of terms used in this manual.