Rockwell Automation 1786-series ControlNet Coax Media Planning and Installation Guide User Manual
Page 46
46
Publication CNET-IN002B-EN-P - June 2010
Chapter 3 Install a ControlNet Coax Media System
Install a Tap Using a Universal Mounting Bracket
Follow these instructions for installing a tap with a universal mounting bracket.
1.
Align the universal mounting bracket with the mounting holes on
the tap.
2.
Using only the screws provided with the tap (as they are the proper
length and head style), follow one of the examples below to attach the
tap to a universal mounting bracket.
20084-M
1
5
4
1
3
4
1
2
3
4
Item
Description
1
Universal mounting bracket (provided with tap)
2
Optional transition plate
3
T-tap
4
Dust cap
5
Y-tap
TIP
The T-taps ship with two sets of screws: machine and course
thread (self-tapping). The machine screws always screw into
the tap. Use only the self-tapping screws if you mount the
transition plate to the DIN-rail bracket.