Rockwell Automation 1786-series ControlNet Coax Media Planning and Installation Guide - Manual (Page 70)

70 Publication CNET-IN002B-EN-P - June 2010
Appendix B Maintain the Cable Strip Tool
3. If you are:
• reversing the memory blade cartridge to use the second set of blades,
go to
step 4
.
• replacing the memory blade cartridge, go to
step 6
.
4. Flip the memory blade cartridge and slide it back into the strip tool.
5. Align the memory blade cartridge (the side with the raised notches) to
the raised area on the inside of the strip tool, and slide the new memory
blade cartridge in. The blades should be on top as you slide the
cartridge in.
20183-m
30031-m
30031a-m