Rockwell Automation 1786-series ControlNet Coax Media Planning and Installation Guide - Manual (Page 49)

Publication CNET-IN002B-EN-P - June 2010 49
Install a ControlNet Coax Media System Chapter 3
Obtain the Toolkit To install the cable connectors, we recommend that you use the tools in the
ControlNet coax toolkit, catalog number 1786-CTK. The tools include those
in the illustration.
If you are installing IP67 connectors, you need a local-purchase heat gun as it is
not supplied in the kit.
41902
1
2
3
4
5
6
7
8
Item Description Item Description
1 Cable strip tool with two blade
cassettes - one for PVC and one
for FEP 5 Calibration/flare holder
2 Terminating resistors and
extra connectors 6 Knife
3 Memory blade cartridges that
contain two sets of memory
blades 7 Crimp tool
4 Memory blade holder 8 Wire cutters