Rockwell Automation 1786-series ControlNet Coax Media Planning and Installation Guide - Manual (Page 65)

Publication CNET-IN002B-EN-P - June 2010 65
Appendix
A
Mounting Dimensions
Introduction The illustrations in this appendix provide dimensions to help you with
mounting taps, universal mounting brackets, and repeaters.
Taps The illustrations show dimensions for BNC connectors. These are examples;
drawings are not to scale.
IP20 T-tap IP20 Y-tap
35.66
(1.40)
15.24
(0.60)
33.02
(1.30)
25.44
(1.00)
39.37
(1.55)
31.37
(1.235)
30.23
(1.19)
15.24
(0.60)
20168 20169
Note: All dimensions are in mm (in.)