Rockwell Automation 1766-L32 Pump Station Controller Quick Start - Manual (Page 24)

22 Publication IASIMP-QS037A-EN-P - May 2013
Chapter 1
Pump Up Overview Screen
From the Pump Up Overview screen you can view pump status, mode,
sequence and level information.
Maintenance Screen
From the Maintenance screen you can:
– The Secured Settings button is only accessible with "Admin" or
"Supervisor" access.
– Press VFD # Speed Hz to enter the desired speed for each VFD.
The VFD # Speed Hz button is visible only if PowerFlex 4 VFD
or Other VFD is selected in the Motor Control Setup screen.
– Press PowerFlex VFD Parameters to open the PowerFlex 4 VFD
Parameters screen. Refer to PowerFlex 4 VFD Parameters on
page 24. The PowerFlex VFD Parameters button is visible only if
PowerFlex 4 VFD is being used.